BD-SW-7BC-01 - Honda CBR1000RR HRC kit 2017 to 2019 - 7 function - bar clamp mount - Map Rain Pit Lap Up/Down Mode

Code BD-SW-7BC-01
Click the image to enlarge
Code BD-SW-7BC-01
£315.00 Exc VAT
Earn 0 reward points with this product.
  • Description

    Make : Honda

    Model : CBR1000RR (HRC kit only)

    Model : 2017 to 2019

    Part Number : BD-SW-7BC-01

    Number of switch functions : 7

    Position : Left side

    Road or Track : Track only

    Mounting type : Mounts directly onto the handlebar using our generic 22mm clamp 

    Download the product : DATASHEET 


    This switch is is a direct 'plug n play' replacement for the standard switch assembly, retaining all controls needed for a track bike but without the controls needed on a road bike. 

    Only for use with the HRC ECU and wiring.

    Rain light switch - This kit only provides the switch and two un-terminated wires for you to connect to your rain light and rain light wiring.


    Functions : 

    • Up
    • Select
    • Down
    • Map
    • Pit
    • Rain switch
    • Lap set


    These 'Type c' switches normally mount onto the clutch post or master cylinder, but Honda only have one clutch post bolt as standard. For this reason the default clamp will be the BR-G generic clamp. This also provides additional clearance for items such as thumb brakes.

    One clamp is supplied free with each switch, with the default clamp to suit a standard bike, but you are free to choose an alternative clamp at the time of ordering at no extra cost should you have an aftermarket clutch post.

    We have clutch clamps for:

    • BR-G   22mm generic bar clamp
    • CL-A    32mm in-line bolt spacing 
    • CL-B    30mm offset bolt spacing - Brembo XR , GP
    • CL-F    30mm in-line as found on Accosato and Hel components
    • CL-K    36mm in-line spacing as found on Kawasaki
    • CL-J    32mm offset bolts spacing as found on Beringer components

    Unless otherwise specified we will supply the BR-G clamp for this application.

    Clamps may be bought separately should you change the clutch at a future time, there is no need to replace the switch assembly

    Perfect for saving space on the handlebar and ideally suited to bikes with aftermarket clutch parts, or thumb brakes.


    Construction / Notes:

    • Billet aluminium body
    • IP 67 waterproof switches with gold plated contacts
    • Raychem type 55 wire and DR25 sleeving
    • Plug and play wiring 
    • Greater crash protection and electrical integrity
    • May be repaired after crash damage
    • Custom designs are our specialty, so feel free to ask and typically at no extra cost.
    • Designed and manufactured in the UK at our workshops close to Silverstone
    • If you are not sure, call us for advice on 0044 (0)1327 263942 - UK
    • See below for compatible products