- Home
- AIM Solo-2-DL , GPS based lap timer, Display, data logger - Generic install
AIM Solo-2-DL , GPS based lap timer, Display, data logger - Generic install
- Description
Solo-DL 2 Multifunction GPS Lap Timer / data logger
--
“the most precise and easy way to get lap times”
The new Aim Solo 2 DL + ECU track day racing lap timer receives the data from two satellites constellations, GPS and Glonass. This is a huge step forward since it is unbelievably faster and more precise than the previous version. The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.
Solo 2 DL, with ECU Connection
There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Aim Solo 2 DL + ECU offers easy connection to your Engine Control Unit providing you a lot of information with just one cable. Where your ECU protocol is not in the database, an ECU Driver Builder is always available in the Race Studio 3 configuration software which you will be able to create your protocol by yourself.
Coil RPM input
Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).
Aim Solo 2 screen can be back-lit in one of the seven available colours:
Aim Solo 2 DL + ECU track day racing lap timer can rely on a database of more than 3,000 tracks all over the world: as soon as it switches on, Solo 2 identifies its position, recognises the starting line coordinates of the track and starts sampling lap times. In the event that the track is not in the database then no problem. Solo 2 realises it and enters into the auto learning mode, automatically understands the characteristics of the track and gives the lap time anyway.
Solo2 LED Display, Even the predictive lap time is much more reliable and the Solo 2 configurable RGB LEDs will give you a clear and fast indication of the comparison with your best lap. The Aim Solo 2 configurable RGB LEDs, will give you a clear and fast indication of the comparison with your best lap.
Aim Solo 2 DL + ECU Race Mode Selection
Aim Solo 2 track day racing lap timer can manage different types of races, Speed races in a closed circuit, Point to-point races, Regularity, Performance tests (0-100 km/h etc.) In each of these configurations, Solo 2 gives you the correct information during the test and powerful data review immediately after each session.
Solo 2 DL Race Data Recall on Screen
At the end of your test, you can quickly review all the key information on your display.
Aim Solo 2 DL + ECU Wi-Fi Communication with the PC - Wi-Fi connection is easy and fast without connectors or cables, Simply the best way to configure your Solo 2, to manage the track database and to download the data to your PC.
iPhone Connection
Use your iPhone for a quick and comfortable data analysis, for managing the track database and even for an On-Line view of the most important parameters of your Engine (in case you have chosen the Aim Solo 2 DL + ECU). In the event that the track is not in the database then no problem. Aim Solo 2 DL + ECU track day racing lap timer realises it and enters into the auto learning mode, automatically understands the characteristics of the track and gives the lap time anyway.