Ducati 848 1098 1198 voltage regulator bracket for right side mounting

--

Use on : Ducati

Model : 848 1098 1198

Part Number : KT124

--

For bikes where the original mounting location either gets too hot and regulator failure is occurring or for when aftermarket components mean the original location is no longer viable.

Mounts over the standard belt cover.

Kit is supplied with

Mounting plate in 3mm anodised 6082 aluminium

• 3 x 32mm stand-off spacers
• 3 x 55mm cap screws
• 2 x M6 x20 dome Torx screws for regulator + flange nuts
• 1 x 40cm extension wire for the generator wiring link (3 way connector)
• 1 x 20cm extension wire for the regulator output (4 way connector)

Can be used on the following Ducati models

• 848
• 1098
• 1098R
• 1198