Blip Box



Magneti Marelli


AIM
Solution Graphics

  Home > Ducati > Miscellaneous components >

Ducati 848 1098 1198 voltage regulator bracket for right side mounting
Ducati right side regulator mount bracket
 
Alternative Views:
ATS05 Temperature sensor
Our Price: £132.00 (158.40 inc VAT)

Quantity in Stock:(Out of Stock)
Availability: Usually Ships in 24 Hours
Product Code: KT124
Qty:

Description Technical Specs
 
Right side voltage regulator mounting bracket for Ducati 848 1098 1198

For bikes where the original mounting location either gets too hot and regulator failure is occurring or for when aftermarket components mean the original location is no longer viable.

Mounts over the standard belt cover.
Kit is supplied with
  • Mounting plate in 3mm anodised 5083 aluminium
  • 3 x 32mm stand-off spacers
  • 3 x 55mm cap screws
  • 2 x M6 x20 C'Sunk screws for regulator + lock nuts
  • 1 x 35cm extension wirefor the generator wiring link (3 way connector)
  • 1 x 14cm extension wire for the regulator output (4 way connector)


Can be used on the following Ducati models
  • 848
  • 1098
  • 1098R
  • 1198

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Voltage regulator bracket for right-sided mounting November 27, 2019
Reviewer: Anthony Lopez from Elephant and Castle, London United Kingdom  
As many of you will know, the 848/1098/1198 models (including S and R) have been recalled to fit additional shielding for the voltage regulator/rectifier.  The recall was inadequate and Ducati are no longer interested for recurrent failures! - I'm on my third stock OEM regulator (non Shindengen Mosfet FHA020AA).

This anodised bracket is well-made, discrete and works well and the regulator barely heats up to touch in the newly ventilated and cooled location.

A very helpful guy Mick Boasman not only responded promptly to my several emails including at the weekend, but he also noticed that I had fitted the bracket upside down (yes it's possible!) where I routed the cables underneath the horizontal cam and strangely the yellow cables and female connector burnt out after just 70 miles.

I recommend requesting the yellow 35 Amp wires to match the wires emerging from the VR and run the cables above the cam (they really are long enough - just!)

Was this review helpful to you?