Blip Box




Magneti Marelli


AIM
Solution Graphics

  Home > Handlebar switches >

BMW 1000RR K67 2019 onwards - 7 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module
BMW 1000RR K67 2019 onwards - 7 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module
 
Alternative Views:


Our Price: £385.00 (462.00 inc VAT)

Quantity in Stock:8
Availability: Usually Ships in 24 Hours
Product Code: BD_SW_7BC_33
Qty:

Description Technical Specs
 
BMW 1000RR K67 2019 onwards - 7 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module


Download the product date sheet here : DATASHEET


This 7 button switch is designed for use on race/track bikes where the road functions such as lights, turn signals and horn are not needed.

Direct mount onto the clutch post to save handlebar space, providing extra clearance for thumb brakes and brake adjusters
Wiring - No modification of the bike wiring is necessary, this kit plugs directly into the connectors of the standard loom via our LIN BUS interface which is programmed to be 100% compatible with the existing bike electronics, so no diagnostic warning lights

GPS / lap timing – The standard switch provides a manual lap timer ‘start’ via the flash function, this is also re-created on our switch but we also provide an option to plug in a separate
GPS lap timer which has large memory of built in track finish lines, as well as an easy to set ‘record’ button for creating new finish line positions. This is NOT supplied as part of this kit but is available as a separate 'plug and play' item. See accessories below

Dual Mode operation - The complexity of the standard switch assembly coupled with the ‘doughnut’ wheel make the standard unit not ideally suited to the track.

Our solution was to use a contemporary layout that is familiar to track riders and split up the host of functions into two modes RIDER / SETUP that are switchable at the touch of a button and indicated by an LED
SETUP – In this mode a blue LED is ON and 6 button functions are allocated to:
  • Wheel - Navigate right
  • Wheel - Navigate left
  • Wheel – Navigate Up
  • Wheel – Navigate Down
  • Menu – Up
  • Menu – Down

RIDER – In this mode the LED is off and these same 6 button functions are allocated to functions needed on-track
  • TC +
  • TC –
  • DTC off/on
  • Flash / lap timer set
  • Menu – Up
  • Menu – Down


Type 'C' switches mount directly onto the clutch post using the two original clamp screws and a new dedicated clamp.

The clamp is supplied free with each switch, with the default clamp matching the bolt pattern of the standard clutch, but you are free to choose an alternative clamp at the time of ordering at no extra cost.

We have clamps for:
  • CL-A 32mm in-line bolt spacing - Standard
  • CL-B 30mm + 7mm offset bolt spacing
  • CL-F 30mm in-line as found on Accosato / Hel
  • BR-G Generic clamp for any 21.8 > 22.2 mm handlebar (does not mount on the brake pump
  • CL-J 32mm + 6mm offset bolt spacing - Beringer

Unless otherwise specified we will supply the BR-A clamp for this application.

Clamps may be bought separately should you change this part at a future time, there is no need to replace the switch assembly

Perfect for saving space on the handlebar yet retaining left / right adjustment via slotted bolt holes.



Construction / Notes:
  • Billet aluminium body
  • IP 67 waterproof switches with gold plated contacts
  • Raychem type 55 wire and DR25 sleeving
  • Plug and play wiring
  • Greater crash protection and electrical integrity
  • Switch may be replaced separately in the event of a crash as this is a 'plug in' component to the LIN module
  • Designed and made in the UK by Bike Sport Developments
  • Custom designs are our speciality, so feel free to ask and typically at no extra cost.



Compatible left switches are listed below

View the complete product range here ...
Price List and application guide



When placing the order there is a 'notes' section where you can provide extra details about your bike and modifications.
Or you can follow up your order with an Email to help us provide the correct parts. Or call us for advice on parts and installation on 0044 (0)1327 263942 - UK

Accessories
BMW 1000RR K46 and K67 - 3 way 'Type C' Brake pump mount - All ECU types - race bike right handlebar switch assembly - Stop/Run Start Mode BMW 1000RR K67 and K46 GPS lap timer
Our Price: £205.00 (246.00 inc VAT)
Our Price: £160.00 (192.00 inc VAT)
BMW 1000RR K46 and K67 - 3 way 'Type C' Brake pump mount - All ECU types - race bike right handlebar switch assembly - Stop/Run Start Mode BMW 1000RR K67 2019 onwards - 7 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module

Share your knowledge of this product. Be the first to write a review »