Bike Sport Developments
Search:
About Us
View Cart
My Account
Help / FAQ
Equipment
Make
Home
>
Handlebar switches
>
BMW 1000RR K46 2013 to 2018 - 6 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module
Alternative Views:
Our Price:
£
365.00 (438.00 inc VAT)
Availability:
Usually Ships in 24 Hours
Product Code:
BD_SW_6BC_34
Qty:
Description
Technical Specs
BMW 1000RR K46 - 2013 to 2018 - 6 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module
Download the product date sheet here :
DATASHEET
This 6 button switch is designed for use on race/track bikes where the road functions such as lights, turn signals and horn are not needed.
Wiring - No modification of the bike wiring is necessary, this kit plugs directly into the connectors of the standard loom via our LIN BUS interface which is programmed to be 100% compatible with the existing bike electronics, so no diagnostic warning lights
GPS / lap timing – The standard switch provides a manual lap timer ‘start’ via the flash function, this is also re-created on our switch but we also provide an option to plug in a separate
GPS lap timer KT170 which has large memory of built in track finish lines, as well as an easy to set ‘record’ button for creating new finish line positions. This is NOT supplied as part of this kit but is available as a separate 'plug and play' item. See accessories below
Mount – This assembly mounts directly onto the clutch post to save space on the handlebar for brake adjusters and thumb brakes
Functions available
Lap timing SET / Flash
Slick +
Slick -
Trip – Lap UP
Trip – Lap DOWN
ABS
Type 'C' switches mount directly onto the clutch post using the two original clamp screws and a new dedicated clamp.
The clamp is supplied free with each switch, with the default clamp matching the bolt pattern of the standard clutch, but you are free to choose an alternative clamp at the time of ordering at no extra cost.
We have clamps for:
CL-A
32mm in-line bolt spacing - Standard
CL-B
30mm + 7mm offset bolt spacing
CL-F
30mm in-line as found on Accosato / Hel
BR-G
Generic clamp for any 21.8 > 22.2 mm handlebar (does not mount on the brake pump
CL-J
32mm + 6mm offset bolt spacing - Beringer
Unless otherwise specified we will supply the
CL-A
clamp for this application.
Clamps may be bought separately should you change this part at a future time, there is no need to replace the switch assembly
Perfect for saving space on the handlebar yet retaining left / right adjustment via slotted bolt holes.
Construction / Notes:
Billet aluminium body
IP 67 waterproof switches with gold plated contacts
Raychem type 55 wire and DR25 sleeving
Plug and play wiring
Greater crash protection and electrical integrity
Switch may be replaced separately in the event of a crash as this is a 'plug in' component to the LIN module
Designed and made in the UK by Bike Sport Developments
Custom designs are our speciality, so feel free to ask and typically at no extra cost.
Compatible right switch is listed below
View the complete product range here ...
Price List and application guide
When placing the order there is a 'notes' section where you can provide extra details about your bike and modifications.
Or you can follow up your order with an
Email
to help us provide the correct parts. Or call us for advice on parts and installation on 0044 (0)1327 263942 - UK
Download the product date sheet here :
DATASHEET
Accessories
BMW 1000RR K67 and K46 GPS lap timer
BMW 1000RR K46 and K67 - 3 way 'Type C' Brake pump mount - All ECU types - race bike right handlebar switch assembly - Stop/Run Start Mode
Our Price:
£160.00 (192.00 inc VAT)
Our Price:
£205.00 (246.00 inc VAT)
Share your knowledge of this product.
Be the first to write a review »