Blip Box




Magneti Marelli


AIM
Solution Graphics

  Home > Yamaha > Handlebar switches >

Yamaha R1 2015 onward - 5 way 'Type C' Brake pump mount - Standard and kit systems - right handlebar switch assembly - Stop/run Up Select Down Start
Yamaha R1 2015 onward - 5 way 'Type C' Brake pump mount - Standard and kit systems - right handlebar switch assembly - Stop/run Up Select Down Start
 
Alternative Views:


Our Price: £295.00 (354.00 inc VAT)

Quantity in Stock:5
Availability: Usually Ships in 24 to 48 Hours
Product Code: BD_SW_5BC_11
Qty:

Description Technical Specs
 
Yamaha R1 2015 onward - 5 way 'Type C' Brake pump mount - Standard and kit systems - right handlebar switch assembly - Stop/run Up Select Down Start



Right side for direct mounting as part of the brake pump assembly, this replaces the standard brake clamp
Designs are available for:
  • 32mm In-line bolts, use clamp type BR-A
  • 30mm offset bolts, use clamp type BR-B
  • 32mm in-line bolts with left offset for Nissin brake pumps, use clamp type BR-N
  • 30mm in-line bolts for Accosato brake pump , use clamp type BR-F
Specify clamp type at the time of ordering. One clamp is supplied free of charge per switch.

Alternative clamps can be purchased separately, no need to replace the switch assembly.
Download the product date sheet here : Datasheet


This switch is intended to replace the standard right hand handlebar switch to provide simple Up, Down and Select push buttons replacing the scroll wheel using an intelligent control circuit board embedded within the switch body. No user programming is required, just plug it in and use it. Full data sheet download available on next page tab.


  • On/Off (kill switch)
  • UP function
  • Select (mode) function)
  • DOWN function
  • Starter

Note :
  • Wiring for the brake switch is not included on the standard 5BC-11 switch, to add this please request at the time of ordering.
  • The aluminium assembly has been designed ultra-slim and encompasses 5 sealed switches.

No modification of the bike wiring is necessary, this kit plugs directly into standard wiring connectors
  • Width at centre - 13.5mm
  • Cable length - Same as the standard switch
  • Coating - Black anodise
  • Made in the UK
Kit comprises:
  • 5 x sealed push-button switches
  • Pre-wired connector to suit the standard bike wiring
  • retaining screws
Alternative 3, 4 , 5 and 8 way left side switches are available for road and track bikes using the standard ECU and YEC kit wiring

View the complete product range here ... Price List and application guide



Accessories
BR-A , Brake clamp for type C race switches - 32mm in-line bolts Yamaha R1 2015 onward - 5 way 'Type C' bar clamp mount - 'KIT' ECU and wiring only - left handlebar switch assembly - Map Up Select Down Pit BR-G , Generic clamp for type C race switches - Left or Right side BR-B , Brake clamp for type C race switches - 30mm offset bolts
Our Price: £48.00 (57.60 inc VAT)
Our Price: £295.00 (354.00 inc VAT)
Our Price: £48.00 (57.60 inc VAT)
Our Price: £48.00 (57.60 inc VAT)
BR-A , Brake clamp for type C race switches - 32mm in-line bolts Yamaha R1 2015 onward - 5 way 'Type C' bar clamp mount - 'KIT' ECU and wiring only - left handlebar switch assembly - Map Up Select Down Pit BR-G , Generic clamp for type C race switches - Left or Right side BR-B , Brake clamp for type C race switches - 30mm offset bolts
BR-F , Brake clamp for type C race switches - 30mm inline for Accosato BR-N , Brake clamp for type C race switches - 32mm inline for Nissin
Our Price: £48.00 (57.60 inc VAT)
Our Price: £48.00 (57.60 inc VAT)
BR-F , Brake clamp for type C race switches - 30mm inline for Accosato BR-N , Brake clamp for type C race switches - 32mm inline for Nissin

Share your knowledge of this product. Be the first to write a review »