Blip Box



Magneti Marelli


AIM
Solution Graphics

  Home > Handlebar switches >

BMW 1000RR K46 and K67 - 3 way 'Type C' Brake pump mount - All ECU types - race bike right handlebar switch assembly - Stop/Run Start Mode
BMW 1000RR K46 and K67 - 3 way 'Type C' Brake pump mount - All ECU types - race bike right handlebar switch assembly - Stop/Run Start Mode
 
Our Price: £205.00 (246.00 inc VAT)

Quantity in Stock:4
Availability: Usually Ships in 24 Hours
Product Code: BD_SW_3BC_33
Qty:

Description Technical Specs
 
BMW 1000RR 2013-K46 and 2019 K67 - 3 way 'Type C' Brake pump mount - All ECU types - race bike right handlebar switch assembly - Stop/Run Start Mode


Download the product date sheet here : DATASHEET

This switch has been designed for use with the standard wiring loom and is a direct 'plug n play' replacement for the standard Stop/Run , Start and Mode switch. Heated grip switch is not included.

Functions:
  • Stop / Run
  • Mode
  • Start
Compatible with:
  • K46 from 2013 > 2018
  • K67 from 2019 onward

Type 'C' switches mount directly onto the brake pump body using the two original clamp screws and a new dedicated clamp.

The clamp is supplied free with each switch, with the default clamp matching the bolt pattern of the standard brake pump (master cylinder), but you are free to choose an alternative clamp at the time of ordering at no extra cost.

We have clamps for:
  • BR-A 32mm in-line bolt spacing - Standard
  • BR-B 30mm offset bolt spacing
  • BR-N 32mm in-line with a left offset for short brake levers typically Nissin or Brembo RC , RCS
  • BR-F 30mm in-line as found on Accosato brake parts
  • BR-G Generic clamp for any 21.8 > 22.2 mm handlebar (does not mount on the brake pump
  • BR-J 32mm offset bolt spacing - Beringer

Unless otherwise specified we will supply the BR-A clamp for this application.

Clamps may be bought separately should you change this part at a future time, there is no need to replace the switch assembly

Perfect for saving space on the handlebar yet retaining left / right adjustment via slotted bolt holes.


Construction / Notes:
  • Billet aluminium body
  • IP 67 waterproof switches with gold plated contacts
  • Raychem type 55 wire and DR25 sleeving
  • Plug and play wiring
  • Greater crash protection and electrical integrity
  • May be repaired after crash damage
  • Designed and made in the UK by Bike Sport Developments
  • Custom designs are our speciality, so feel free to ask and typically at no extra cost.


Compatible left switches are listed below

View the complete product range here ... Price List and application guide


When placing the order there is a 'notes' section where you can provide extra details about your bike and modifications.
Or you can follow up your order with an Email to help us provide the correct parts. Or call us for advice on parts and installation on 0044 (0)1327 263942 - UK

Accessories
BMW 1000RR K67 2019 onwards - 7 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module BMW 1000RR K46 2013 to 2018 - 6 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module
Our Price: £385.00 (462.00 inc VAT)
Our Price: £365.00 (438.00 inc VAT)
BMW 1000RR K67 2019 onwards - 7 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module BMW 1000RR K46 2013 to 2018 - 6 way 'Type C' Clutch mount - race bike left handlebar switch assembly plus LIN / GPS interface module

Share your knowledge of this product. Be the first to write a review »