Blip Box




Magneti Marelli


AIM
Solution Graphics

  Home > Handlebar switches >

Aprilia RSV4 1000 and 1100 from 2017 - 7 button dual mode race switch - bar clamp mount
7 Button Aprilia 2017 onward left race switch
 
Alternative Views:


Our Price: £385.00 (462.00 inc VAT)

Quantity in Stock:5
Availability: Usually Ships in 24 Hours
Product Code: BD-SW-7BC-45
Qty:

Description Technical Specs
 
BD-SW-7BC-45, Aprilia RSV4 1000 and 1100 from 2017 - 7 button dual mode race switch - bar clamp mount

Download the product date sheet here :
DATASHEET

This 7 button switch is designed for use on race/track bikes where the road functions such as lights, turn signals and horn are not needed.

Wiring - No modification of the bike wiring is necessary, this kit plugs directly into the connectors of the standard loom via our CAN BUS interface which is programmed to be 100% compatible with the existing bike electronics, so no diagnostic warning lights

This assembly replaces both the standard switch assembly and the flipper levers.

Dual Mode operation due to the large number of functions

Our solution was to use a contemporary layout that is familiar to track riders and split up the host of functions into two modes TRACK / SETUP that are switchable at the touch of a button and indicated by an LED
TRACK– In this mode a blue LED is ON and 6 button functions are allocated to:
  • Navigate right
  • Navigate left
  • Navigate Up
  • Navigate Down
  • Navigate Push in
  • Wi Fi

RIDER – In this mode the LED is off and these same 6 button functions are allocated to functions needed on-track
  • PIT speed limit
  • AWC - Up
  • AWC - Push
  • AWC - Down
  • Flipper +
  • Flipper -


Type 'C' switches mount directly onto the clutch post using the two original clamp screws and a new dedicated clamp.

For bikes such as the Aprilia which only have a single clutch post bolt we will supply the BR-G clamp to mounts directly onto the handlebar.

The clamp is supplied free with each switch, with the default clamp matching the bolt pattern of the standard clutch, but you are free to choose an alternative clamp at the time of ordering at no extra cost.

We have clamps for:
  • CL-A 32mm in-line bolt spacing - Standard
  • CL-B 30mm + 7mm offset bolt spacing
  • CL-F 30mm in-line as found on Accosato / Hel
  • BR-G Generic clamp for any 21.8 > 22.2 mm handlebar (does not mount on the clutch post)
  • CL-J 32mm + 6mm offset bolt spacing - Beringer

Unless otherwise specified we will supply the BR-G clamp for this application.

Clamps may be bought separately should you change this part at a future time, there is no need to replace the switch assembly

Perfect for saving space on the handlebar yet retaining left / right adjustment via slotted bolt holes.


Construction / Notes:
  • Billet aluminium body
  • IP 67 waterproof switches with gold plated contacts
  • Raychem type 55 wire and DR25 sleeving
  • Plug and play wiring
  • Greater crash protection and electrical integrity
  • Switch may be replaced separately in the event of a crash as this is a 'plug in' component to the LIN module
  • Designed and made in the UK by Bike Sport Developments
  • Custom designs are our speciality, so feel free to ask and typically at no extra cost.

Compatible left switches are listed below


When placing the order there is a 'notes' section where you can provide extra details about your bike and modifications.
Or you can follow up your order with an Email to help us provide the correct parts. Or call us for advice on parts and installation on 0044 (0)1327 263942 - UK

Accessories
Aprilia RSV4 (all models up to current), race/track bike handlebar switch assembly Stop/Run and Start
Our Price: £145.00 (174.00 inc VAT)
2 Button Aprilia RSV4 handlebar switch

Share your knowledge of this product. Be the first to write a review »