Blip Box




Magneti Marelli


AIM
Solution Graphics

  Home > Magneti Marelli > Superbike systems >

Magneti Marelli Superbike kit - Ducati 1199 Panigale
Ducati 1199 Superbike system - Magneti Marelli
 
Alternative Views:


Our Price: £13,200.00 (15,840.00 inc VAT)

Availability: These items are built to order. Please contact us for more information
Product Code: SUPERBIKE-DUCATI-1199
Qty:

Description Technical Specs
 
For customers who are not looking for a complete change of electronics, or feel this kit is out of their budget. Then take a look at Blip Box, fully automatic down-shift auto-blipper for the 899 and 1199.


Bike Sport Developments Ltd
are proud to announce the only Magneti Marelli based ‘kit’ electronics package for the Ducati 1199 Panigale. Suitable for professional race teams and the most demanding of individuals who want the best possible system for their race/track bike.

Each kit comes ready programmed and pre-loaded with maps to suit a standard engine with open exhaust pipes. We will even pre-load a tyre slip map to suit the tyres you are running based on our extensive tyre library. Just bolt it on and start the bike.

System capabilities:
  • Race proven traction control with your choice of tyre slip maps.
  • Handlebar mounted TC controls for map level and ‘turn off’
  • Wheelie controls for each gear and track position
  • Launch controls coupled with rev limiter and anti-wheelie + rider on/off over-ride via push button
  • Programmable engine braking controls for seamless cornering as well as ‘closed loop’ ‘backing in’ slip controls.
  • Clutchless down shift ‘auto blipper’ via load cell on the shift rod.
  • Quick shifter via the same load cell with both cut and ‘post shift’ torque reduction.
  • Closed loop fuel control for each cylinder via NGK wide band lambda sensors in each exhaust
  • Individual fuel/ignition and throttle controls for each cylinder. All pre-mapped
  • Pit lane speed limiter
  • Built in data logger ready programmed, and ready to download
  • 10Hz GPS system for circuit mapping and lap timing. Just push the button where you want to trigger the lap time display and the location will be remembered for all subsequent sessions at that circuit.
  • Chassis sensors for Fork, Shock, brake pressure
  • Electric starting is retained as well as ECU control of the starter to inhibit use when in gear or engine is running.
  • Standard wheel speed pick up sensors are retained and used by this kit, front and rear.
  • Super fast Ethernet PC communication


The kit includes all of the following parts, even down to the additional screws and fasteners.
  • Magneti Marelli SRT ECU running Bike Sport Licensed software specific to the 1199 Panigale + Integral 64Mb data logger
  • Aluminium ECU mounting bracket - ECU
  • Magneti Marelli MDU220 multi page digital display
  • Aluminium ECU mounting bracket – Dashboard including support posts.
  • One piece race specification Raychem wiring loom using type 55 motorsport wire.
  • Gear shift load cell including rod ends and link rod.
  • Inertial sensor and mounting bracket for sub-frame fixing
  • Shock sensor and all mounting brackets
  • Fork sensor and all mounting brackets
  • Front brake pressure sensor and all fitting adaptors
  • 4 way aluminium handlebar switch block for TC+ , TC- , Anti-Wheelie off/on , Pit lane speed limiter
  • 2 way aluminium handlebar switch block for Stop/Run and Starter
  • GPS module and remote antenna
  • 2 wide band NGK UEGO lambda sensors.
  • Wintax 4 analysis software
  • Vision 5 software dedicated to the 1199 installation.
Each system we produce is not only fully mapped, it has a well developed and race proven traction, launch and wheelie control system as standard.

Fitting time for the kit is typically 1 day and no further dyno work is necessary unless you have some specific engine changes that should be corrected for.

Full product training is available free of charge at our UK workshop near Silverstone or direct assistance and training with the installation at your premises anywhere in the world at extra cost. For those who wish to have a dedicated tuning service for chassis controls to suit the rider please contact us for a quotation.

Work required by the installer
  • Fit lambda bosses to front and rear exhaust (most exhausts will already have these)
  • Fit inertial sensor to sub-frame. Requires 2 x 5mm holes to be drilled
  • Remove the standard wiring loom and all ECU modules, including the dash.
  • Remove electronic controls from fork and shock, replace with cartridge elements. These are not supplied with the kit.
  • If the bike has ABS, remove the ABS system and fit standard type brake lines.
  • Some small modifications of the front aluminium fairing mount are required to provide extra clearance for new dashboard.
  • Make provision through the front under-tray for fork sensor wiring.
  • Remove standard sensors for side stand and brake light switches.
We also offer a full conversion service at our workshop for those who prefer us to do the work.

Note this kit is only intended for track bikes not equipped with lights or turn signals. Nor is it emission approved for highway use or for any worldwide location which requires emission controls.



Watch a Marelli SRT system in action fitted to an 1198 / If viewing in low resolution please change your settings to see HD quality.
Non standard bikes
  • If your bike is non-standard in any way, please contact us prior to purchase to ensure that we are able to supply the correct components

Accessories
Blip Box-Pro - Ducati 1199 / 899 Panigale - Autoblip downshift module (load cell activated)
Our Price: £708.00 (849.60 inc VAT)
Blip Box-Pro - Ducati 1199 / 899 Panigale

Share your knowledge of this product. Be the first to write a review »